IK Multimedia Irig Stream Pro Audio

Scheda Audio Portatile 

L'iRig Stream originale offriva funzionalità rivoluzionarie che lo hanno reso un must per milioni di creatori. Ora iRig Stream Pro porta i tuoi podcast e streaming a un livello completamente nuovo. Questa interfaccia audio a 24 bit, 96 kHz per iPhone, iPad, Android e Mac/PC offre un preamplificatore microfonico XLR, ingressi RCA stereo, TRRS e ingressi per dispositivi (loopback) - oltre a routing avanzato, comprende controlli facili e portabilità totale. È tutto ciò di cui hai bisogno per uno streaming di qualità professionale, proprio nel palmo della tua mano.

Specifiche Tecniche

• Type: 2 in/2out or 4 in/2out
• Conversion: 24-bit A/D, 24-bit D/A
• Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Power: USB bus powered. 48V operations with iOS devices require battery or DC IN. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Pro charges the connected iOS lightning device.
• Metering: 3x LEDs for overall streaming signal. Peak meter for Mic/Inst input.
• Device Connection: mini-DIN
• Dimensions: 123 mm x 67 mm x 40 mm
• Weight: 146g
• Connector In: 2x RCA (unbal.) Left/Right
• Nominal Input Level: -10 dBV
• Head Room: 10 dB - Level @ max
• Input Impedance: 16.5k Ohms
• Frequency Response: from 20 Hz to 20 kHz (-1.5 dB)
• Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 3.8 mV RMS to 388 mV RMS
• Microphone Input Impedance: approx 2 kOhms
• Analog Gain Range: 40 dB
• Phantom Power: +48 V ± 4 V
• Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min - from 20 Hz to 20 kHz (-3 dB) Gain @ max
• Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Instrument Input Level: from 70 mV RMS to 1.8 V RMS
• Instrument Input Impedance: 1M Ohms
• Analog Gain Range: 28 dB
• Frequency Response: from 20 Hz to 20 kHz (-1 dB) Gain @ min - from 20 Hz to 20 kHz (-3 dB) Gain @ max
• Headset/Phones Connector: 1/8” TRRS jack (CTIA wiring standard)
• Supply voltage: > 2,5 V
• Microphone gain: Adjustable with numbered thumbwheel
• Frequency Response: 20 Hz – 20 kHz
• Headphone Level control: numbered thumbwheel
• Battery Life: Phantom power On with iOS device: up to 20 hours (Alkaline batteries), with mic input connected to 3.1 mA phantom powered load
• Note: all measurements made with Stream Level knob at 0dB.
• Package includes: iRig Stream Pro interface - Lightning to mini-DIN connection cable with charging features (60cm/23.62") - USB C-Type to mini-DIN connection cable (60cm/23.62") - USB A-Type to mini-DIN connection cable (60cm/23.62"), 2x 1.5V AA battery - Velcro strip
• Compatibility: iOS Devices - Compatible with iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone SE (2nd generation), iPhone SE, iPhone 11 Pro Max, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone 6, iPad (8th generation), iPad Pro 10.5-inch, iPad Pro 12.9-inch (2nd generation), iPad Pro 9.7-inch, iPad Pro 12.9-inch (1st generation), iPad Air (3rd generation), iPad Air 2, iPad mini (5th generation), iPad (7th generation), iPad (6th generation), iPad (5th generation), iPod touch (7th generation), iPod touch (6th generation). Also compatible with all newer iPhone, iPad and iPod touch models.
• Computers: macOS® 10.6 or later. One free USB port. - Windows One free USB port. For low latency, the IK Multimedia's iRig audio driver must be installed. Download the iRig ASIO driver here.
• Android Devices: Compatible with Android devices running Android 5 or later and with USB digital audio capabilities. Micro-USB-OTG mini-DIN cable (sold separately) may be required (depending on device model).